I have really been fortunate in having a pretty good support system as our Deville gets put back into original working order.  Because of the water damage, I am rebuilding and refinishing pretty much the entire inside.  I have relied on sites such as Larry Walsh's incredible series on rebuilding the Deville and Rebuilding the Shasta

 http://www.cannedhamtrailers.com/

I watch the appropriate video the night before to make sure I know what I should be looking for or what not to do!  Larry is a natural teacher and
it's like talking with an old friend as I watch him work magic on those old trailers.  Lots of others have shared what works and doesn't in their blogs.

Some one had asked about how to do French Polish using Shellac.  I figured I'd contribute back in the spirit of those who have shared so much to me.  French Polish is an old technique that is used for fine furniture and musical instrument.  The technique is not difficult to master....kinda like spit shining boots for those in the service.  The thing I like about it is that  it goes quickly.  You can put fifty coats on in a day and have rich, mirror like finish that just reeks of old.

Here is part 1 of how to apply French Polish.  I apologize for the photography...I shot it with my IPHONE and didn't have a tripod.  Part  2 is right below the first video....I guess where it should be.   

I like to watch these in full screen.

French Polishing With Shellac from jim Wilkins on Vimeo.

Part 2 of how to do French Polish with Shellac for restoring vintage trailers.

So the final snow storm of the season has come and gone....I hope.  Lots of wind and blowing snow.  The lilacs and roses aren't sure what they're supposed to be doing.  I love the crunchy snow when I go down to feed but can do without the muck and sticky mud when it starts to melt. 

The Deville and the horses are getting tired of the cold stuff!

they are calling for temperatures in the 90's down the hill and it will be warm here.  Getting set to tear into the repairs to the bracing and the paneling in the front of the Deville.  It looks like we have a long window of high pressure building and that means no worries about getting the inside wet while that process takes place.

I am very happy with how the inside cabinets are looking after I used the french polish with the shellac.  I really like the look....it's easy for my nontechnical mind and abilities and I can repair dings very easily.

This is what a lot of the wood looked like before I started.

Birch by passenger side dinette and door

 The cabinets had a lot of staining and water marks but the unique shape
meant that I wanted to try and save them if possible.  I stripped them
and sanded with sandpaper down to 220 and then steel wool.  Cleaned very well and put some minwax Oak stain on.  That seemed to match the existing birch paneling the best when followed with Amber Shellac.

Workmate with scraper, French Polish "rubber" and shellac and  Denatured Alcohol

I get some scraps of rags (I use old socks).  Cut them into strips and make a ball.  I dip that into the Shellac solution and get it soaked.  I wrap the ball with a small piece of T shirt material and twist.  I then flatten it into my palm and apply a single drop of virgin Olive oil to the surface to help it move smoothly on the wood.  Then...just I apply the ball to the wood in circular motions.  Some say to use figure eights but I have better luck with
 the circles.  I start at the top and go across and move on down.  By the time I am at the bottom, the top has dried enough to go back and start over again.  Takes a number of applications....like 30-40 but it is a small area and it goes quickly.

Here's the cabinet over the oven/stove.  It was really thrashed but turned out pretty good, I think.  After applying the Amber shellac to taste for color, I switch to clear shellac and layer it until I like the depth and shine.  It really is incredible to see just how nice this turns out.  My other efforts with a brush (even a 35 dollar brush) were not near as nice.

I think it turned out pretty good.  Wish I could capture it better on camera.  

Here's the cabinet over the sink. 

The one cabinet I really thought we would have to rebuild was the tall one by the door.  Fifty years of boots kicking it and making marks and scratches made me think there was no way.  Lots of elbow grease and the french Polish really made it pop.  I am very pleased with how it came out. I figured it would take me days to get this cabinet done but it went quickly and I was finished a couple of hours. 

I am planning on stripping and refinishing all of the existing paneling that will be kept and all of the new paneling that I will install.  Same process....strip...sand...pre-stain treatment- stain...amber shellac and then clear shellac.

That's my ice box waiting to be reinstalled in the closet

I have a week long course for Public Information Officers I am coordinating and then will dive in and get the front end fixed and buttoned up.  We've come a long way.  Never dreamed we'd be doing all of this when we brought the Deville home.  It's gonna be incredible when we're done.

We just had another wet storm roll through our neck of the mountains and it left us with six inches of wet snow.  Since I can't work on the trailer and am dead in the water when it rains...I thought I would post a few pics from our place.  I'll be starting the front restoration of the framing and paneling when it dries out.

This is the view from our front porch if I am using my 400 telephoto lens on the Canon.  We used to live up in the big trees before we moved down a little bit to have our horses on our property.  Never tire of the view...

Another view from a different angle

 

Making friends.....Fire and Annie

Yucca Bloom

Male Anna's Hummingbird

Riding out the storm....

I've got something on how to do the french Polish technique that I am working on and will update my progress on the frame and paneling rebuild.  Thanks for looking.

So I was walking around the Deville this morning after feeding and saw the screen the PO had put over the slash in the front tin.

I need to get that fixed before I button up the front end.  I plan on using some flashing metal...cut to a smaller size then the screen and placed on with screws and putty tape to keep the water from coming in.  Perfect scenario would be to put a whole new piece of tin but that 's not in the cards.  Maybe down the road.

I also glanced at the window that has to come up and the hole cleaned of the residual silicone....the curse of restoration!  I need to get on that sooner then later.  There is simply no easy way to get that stuff off.



Been working on the interior cabinets while everything is torn up and being rebuilt.  Going pretty good and i learn something every day.  I am using Shellac and found a system that works for me.  I use a brush to get it on the wood and start by stripping the cabinets three times.

 I mask everything within a few feet or where I might slip and get this stuff on.

The stuff is wicked bad for you and I always getting it inside my gloves somehow.  Like having some pissed off red ants running around and biting your wrists.  I let it set for 15 minutes and scrap it off.

After the third time, I wash the wood with coarse steel wool and water.  It comes looking pretty clean.  A lot of these cabinets were incredibly dirty and scuffed but have cleaned up very well.  They also have rounded edges which I do not have the skills to reproduce so salvaging them was a priority.  I am very pleased with the results.

I'll let it dry for a day....sand it with 220 and start the Shellac.  I am putting a base coat of two to three coats of thinned Amber shellac and alcohol...almost 50/50.  I put that on with a brush.  When that dries well, I start doing what is called a French Polish technique or at least my version.  It is labor intensive but I am not on a timetable and I am very pleased with the results.  Here is the cabinet that is on the other side of the sink.

I cannot capture the depth and color of the cabinet with my point and shoot but it is almost like furniture.  No brush strokes.  This is only the Amber Shellac.  I begin using the clear shellac today and will build up even more.

Here's the cabinet that goes over the dinette.  We love our propane light!

I take a rag and fold it up and over another rag.  I pull the rag tight... like a baseball over the stuffing and dip it into the shellac and alcohol mixture and start rubbing.  The goal is to not feel any resistance and to put very thin layers down.  If it starts sticking very badly, I will put a drop of mineral oil on the rag to finish to area.  When that is done, I go over it with a drop or two of alcohol to "spirit it off".  Bottom line is that you can put coat after coat on as it dries in minutes.  Same process as used on guitars and violins.


That's what I have been doing.  We have the dinette upholstery back and it turned out incredible.  Can't wait to get them back in.  Here's a  before picture of the dinette:

Here's what the new one's look like.

My photography does not do justice to how cool the leather and distressed leather along with Serape material accent look.

I'll leave you with the view we are blessed with every day of the year.  Ever changing but always spectacular. 

Some folks have asked about the wagon and horses in the background of one of our pictures of the Deville in it's parking area while we work on it.

Has nothing to do with the Deville but is a big part of our lives.

The '59 Deville  and the horses

We live in a rural area in the mountains and have had horses as part of our family since the 70's.  We even operated a rent string for a couple of years that catered to the summer camps in the mountain town where we live.  At one time, we had ten horses of our own but time and aging has thinned the herd to seven.  We have a combination of Belgian Draft horses, Haflinger Draft ponies and a Quarter Horse.

We just lost Fire...a big Polish Arab...that we had for 20+ years.  He was a gentle as a lamb but had the heart of a lion.

We rode a lot of trails together and he gave a lot of kids their first rides.


The Belgian Drafts are truly gentle giants.  We had four but lost Katie this year at 21 years old.  We have wagons and farm implements and Katie and JC were "broke the best" as our Amish friends used to say.


Here's a couple of shots taken at Bishop Mule Days over the years where we pull the BLM Fire Wagon.  They loved the crowds and would prance down the street proudly the entire route.

Katie is the near horse without the blaze.  She was the leader

 of our herd.

Our Halflinger's are very similar in color and disposition to the drafts but about half the size.  Very easy keepers and really like to be around people.  Belgians on the right and Luke, our first Halflinger on the left.
When it's brushing time, everyone wants in on the act.  You can get an idea of just how big these horses are as my wife is standing on a tack box and the girls have their heads bent over to be brushed.

So for those who have asked, we continue to enjoy our Equine and Canine family as we work on the newest addition...our 59 Deville. 

More about the progress I've made and some things I've learned.